Temporary Grounding Solutions

CHANCE® has been providing reliable temporary grounding solutions around the world since 1937.

Download the CHANCE Encyclopedia of Grounding

CHANCE Lineman Grade Tools is a trusted source for temporary grounding equipment and information on how it should be used. Fill out the form to get the industry-leading publication on temporary grounding, the CHANCE Encyclopedia of Grounding. Read some answers to frequently asked temporary grounding questions below or ask your question by contacting us.

CA09040E Encyclopedia of Grounding_Page_001

Frequently Asked Questions

What are your fault current levels, X/R ratios, and durations?

To ensure you are using properly rated temporary grounding equipment, you must know the maximum possible fault current and the X/R value at the grounding site, and duration. All can vary due to location and changes in your system. Once you know these variables, the appropriately tested temporary grounding (TPG) sets can be determined.

What is the condition of your grounding equipment?

Equipment used in the field can take a hard beating. It’s very important to have your temporary protective grounding (TPG) sets periodically tested (OSHA 1910.269 App C Section III.D.3.i; ASTM 2249) to confirm they are still in good working condition. The TPG sets need to provide a low impedance path to ground to clear a fault (OSHA 1910.269(n)(4)(i,iii)) and provide a low resistance parallel path to the lineworker that will pass virtually all of the fault current and minimize the current going through the worker to a non-hazardous level (OSHA 1910.269(n)(3)). Visually inspect equipment before each use. Industry “best practice” is to test grounding equipment at least every 12 months. Check out our Ground Set Tester.

When was your grounding equipment last tested?

Industry "best practice" is to test grounding equipment with a ground set tester at least every 12 months. If you are interested in a free consultation from our team to analyze your grounding procedures and equipment, contact us.

Are you creating a proper Equipotential Zone?

Required by OSHA 1910.269(n)(3), an Equipotential Zone is “a zone that minimizes differences in electric potential between conductive objects in the work area” (OSHA 1910.269 Appendix C, (III)(D)(2)(ii)). Are you making the grade? Bonding all conductive objects in the work zone minimizes the risk of a hazardous difference in potential across the worker’s body. In 2014, OSHA 1910.269 Appendix C was modified to include guidelines for how employers can comply with this Equipotential Zone requirement. Read about it here.

Have another question?

Click here to send us your question

Explore Our Temporary Grounding Products

Read Our Posts On Temporary Grounding

About CHANCE® Lineman Grade Tools™

CHANCE® Lineman Grade Tools™  have been relied upon by electric utility workers since 1937. Our product portfolio includes: hotline tools for distribution, transmission and substation, temporary cover-up, instruments and meters, temporary protective grounding equipment, insulated ladders and platforms, load handling equipment, truck accessories and rubber insulating gloves. 

TO THOSE WHO CLIMB™